Repositorio Bibliográfico Biocultural

Somos un mismo pueblo con culturas diversas

Por favor, use este identificador para citar o enlazar este ítem:
http://repositoriodigital.ipn.mx/handle/123456789/5807
Título :  DISEÑO HIDRÁULICO DE REDES A PRESIÓN EN LOS SISTEMAS DE RIEGO, EMPLEANDO UN MODELO MATEMÁTICO.
Autor :  DURÁN ESCAMILLA, Pino
PONCE GARCÍA, PORFIRIO CORNELIO
Fecha de publicación :  3-jul-2012
Resumen :  In northern México, has been a problem for water resources, because as you know, the
distribution of this is very different from as in the south, in the northern precipitation
presented are lower, preventing an average of 428 mm per year and the water used in
irrigation comes mainly from that is stored in dams of the region and 92.5% is used for
irrigation.
Several alternatives have been developed in order to make more efficient water use in
irrigation and one of them is given below, that is conducting a hydraulic design in a
closed network or pressure, we have applied this hydraulic design of a network to
pressure at a district north of the country which in this case is the irrigation district 041
«Yaqui River», all of which surface is sowing irrigation, which it represents a big
advantage because they get more agricultural products in less time, that is we shouldn’t
wait rainfall of rain to be able to cultivate.
To perform a hydraulic design of a closed network using a computer-assisted
mathematical model, there are several business models for the design of distribution
networks, however, most need to acquire licenses with high cost for using However, we
found that the model EPANET 2.0 is well suited to this work and its access is free, and it
is not very complex in its use.
In this thesis, we found that applying the design hydraulic with EPANET 2.0 in an system
irrigation pressure is more efficient water use by 70% and that various alternatives can
be proposed design is, you can change the source of supply network and using the
mathematical model obtained the diameters optimal of design, and this work had the
purpose of contribute to the improvement of designs hydraulic irrigation pressure.
Descripción :  Eficientar el uso del agua utilizada en el riego, a través del diseño hidráulico óptimo de
una red cerrada de distribución en un sistema de riego.
Diseñar y calcular redes cerradas a lo largo de los linderos de las parcelas y en los
caminos de la zona de riego, así como evitar pérdida de agua por la evaporación e
infiltración.
URI :  http://www.repositoriodigital.ipn.mx/handle/123456789/5807
Aparece en las colecciones: Maestría

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
JESÚS CHIRINO GALINDO. 2pdf.pdf 7.69 MB Adobe PDF Visualizar/Abrir

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.

Excepto si se señala otra cosa, la licencia del item se describe como Attribution-NonCommercial-NoDerivatives 4.0 International

Creative Commons

Más de este tema...

Interacciones entre medio ambiente y desarrol

Interacciones entre medio ambiente y desarrollo en el t...

Saberes ancestrales y gestión comunitaria de

Please use this identifier to cite or link to this item...

Integración y Análisis de Inteligencia Sani

Please use this identifier to cite or link to this item...